LED vs Normal Lighting – Know the Difference

The bulb in your lamp adjacent to the bed has conked off and you visit a store to buy one. You initially decide to buy LED lights from a Melbourne store since you thought of decorating your home this festive with the LED light installation like an outdoor LED strip lighting. Though, you still have minute doubts if LED lighting is the obvious choice. This section will clear the basic differences between LED lighting and the normal lighting options available out there to help you make an informed decision.

What is LED lighting?

The abbreviation LED stands for Light Emitting Diode. LED is a diode with two electrodes through which electricity passes unidirectional, which technically doesn’t make it a bulb. An LED bulb is a combination of several small diodes placed connected to a small chip. The size of such a combination differs according to the required brightness.

LED Upgrade

What are the options in normal lighting?

This area broadly covers two traditional options – incandescent bulbs and CFLs.

The incandescent bulb is the most common form of bulb mankind has seen so far because of its inventor, Thomas Edison, in 1879. These are the yellow light generator with the help of a wire filament shielded by a glass dome.

A CFL bulb is nothing but a ‘compact fluorescent light bulb.’ These are the spiral bulbs, easily available which are mostly marketed as energy-efficient.

Key Differences

    1. Energy savings

      The biggest differentiator between LED and other types of lighting is energy efficiency. LED bulbs consume up to 75% less energy than incandescent bulbs. Incandescent bulbs, on the other hand, consume approximately 90% of the energy in producing heat energy, making it the worst energy-efficient bulb on the market. CFL bulbs too are energy-efficient but only in comparison to incandescent bulbs.

    2. Runs longer

      In other words, their lifespan. LED lights tend to have a longer lifespan. These folks could last up to 50,000 hours or even more. In the run long, this factor of LED leads to reduced cost and higher savings. Their incandescent counterparts are famous for carrying the title of ‘worst lifespan of any lighting’ within the range of 1,000-2,000 hours. The average lifespan of CFL bulbs is around 8,000 hours.

    3. Cost

      The purchasing cost of a LED bulb initially is high due to the technology and energy efficiency. However, this purchase quickly becomes an investment because of its low maintenance and reduced energy consumption capability. In few months, the bulb becomes practically ‘free of cost’ to the owner. Though incandescent bulbs are cheaper to buy, their shorter lifespan and high energy outperform what LED has to offer.

These are only a handful of differences, with several more that make them popular worldwide. The key point to note is that LEDs are extremely versatile and can be used for a wide variety of uses. Today, LEDs are taking over in every field and replacing the traditional halogen bulbs, argon-filled bulbs, etc. So, take your lighting setup to the next level by getting your free LED lighting installation in Melbourne through a government energy upgrade program, free of cost. Under this program, you get free LED lighting installation with a few simple steps. So get your free LED lights in Melbourne by contacting through this form.

Leave a Reply